• Explosion proof mastic

    Explosion proof mastic

    This product is a kind of deep black, solvent-free (tasteless), environmental protection, harmless to human body, irregular appearance of mucilage. It is widely used in national defense and oil, Chemical industry, gas station, substation, hazardous warehouse and other explosion hazardous places, as display tube or cable wiring workers
    It is used for explosion-proof isolation and sealing. It can be used for wrapping wire, joint, cable, pipe, ground wire, etc. to prevent fire.
  • Flexible organic plugging material of intumescent fireproof sealant

    Flexible organic plugging material of intumescent fireproof sealant

    Fire clay is also called organic fireproof plugging material, which can be divided into bag and box. The material is mainly used for plugging the holes of wires and cables to prevent the fire of wires and cables from spreading from holes to adjacent rooms and reduce fire losses. It has the functions of smoke prevention, fire prevention and dust prevention. Therefore, the plugging material is widely used in power plants, industrial and mining enterprises, high-rise buildings, shipbuilding power, post and telecommunications, substation, metallurgy and other system engineering.
  • Inorganic fireproof plugging material

    Inorganic fireproof plugging material

    Inorganic fireproof plugging material, also known as quick setting fireproof material.
    It is usually called quick setting fireproof material
  • Elastic fireproof sealant

    Elastic fireproof sealant

    Using water-based emulsion as the base material, plugging the application area: plugging the sealing joint of the door frame with strict requirements for smoke prevention. Expansion type fireproof sealant, in order to obtain the required fire protection effect, apply the prescribed thickness to determine that the sealant has contact with the surface of the pipe base material to obtain the greatest adhesive force. For excess mastic, before it hardens, it can be removed with water. Elastic fireproof sealant, clean the opening, and prepare to apply FS-I joint surface should be removed scattered debris, dust, oil stains, frost, wax, etc., and keep dry. One component, water-based, acrylic acid fire-proof sealant is a high-performance and elastic antifungal sealant. It can resist high-temperature and high-pressure. It can resist high-temperature, low-temperature, ultra-high, medium, low-pressure and negative pressure, as well as high-speed. Single component sealant, non adhesive, dark red, black paste sealant, does not solidify at room temperature and ablates at high temperature Flame retardant sealant is a new type of one component fire sealant. In recent years, in order to meet the needs of the development of building energy-saving technology, combined with the advantages of domestic and foreign products, it is made of high molecular materials.
  • Fire retardant tape

    Fire retardant tape

    This product is suitable for the fire prevention of power and communication cables, which is of great significance for eliminating hidden dangers, ensuring the normal operation of power transmission and distribution lines and communication lines. The self-adhesive fireproof tape produced by our company is a new type of fire-retardant product for power and communication cables. It has the advantages of fire-retardant and fireproof performance, self-adhesive and operability. It is non-toxic, tasteless and pollution-free in use, and does not affect the current carrying capacity of the cable in the operation of the cable. Because the self-adhesive fireproof tape is used to wrap on the surface of cable sheath, when a fire occurs, it can quickly form a carbonized layer with oxygen resistance and heat insulation, which effectively prevents the cable from burning.
  • Fire retardant bag

    Fire retardant bag

    Db-a3-cd01 fire-retardant bag is a new type of fire-proof supporting refractory developed by Weicheng company according to the new national standard of gb23864-2009 (fireproof plugging material). The shape of db-a3-cd01 fire-retardant bag is like a small pillow, the outer layer is made of treated glass fiber cloth, and the interior is filled with a mixture of inorganic non combustible materials and special additives. The product is non-toxic, tasteless, corrosion-free, water-resistant, oil-resistant, Hygrothermal resistant, freeze-thaw cycle resistant and good expansion characteristics. It can be disassembled and reused at will. It can be made into various shapes of firewall and fireproof layer according to different requirements of users, and also can be used to plug holes requiring fire-proof treatment. When encountering fire, the materials in the fire-retardant package are heated and expanded to form a honeycomb block, forming a tight sealing layer to achieve fire prevention and heat insulation, and effectively control the fire within the local range. When the plugging thickness reaches 240mm, the fire resistance limit can reach more than 180min.
  • Fireproof coating board (model: dc-a2-cd08)

    Fireproof coating board (model: dc-a2-cd08)

    dc-a2-cd08 fireproof sealing plate system is a new type of fireproof material developed by our company, which is odorless, halogen-free, with good weather resistance, smoke tightness and air tightness. It is widely used in nuclear power, power telecommunication, metallurgy and petrochemical industry. Because the construction is simple, so it can save manpower and reduce cost. It is especially suitable for frequent cable replacement Important parts of the body.
  • Cable fire retardant coating

    Cable fire retardant coating

    The CDDT-AA type cable fire retardant coating is a new type of fire retardant coating developed by our company according to the standards of the GA181-1998 Ministry of public security. The product is made up of all kinds of fire-retardant, plasticizer and so on. It is the advanced water and electricity cable in the country.This product can produce uniform and dense sponge foam insulation when it is heated. It can effectively inhibit and block the spread and spread of the flame, and protect the wires and cables. Its main advantages are: environmental protection, no pollution, non-toxic and tasteless, no threat to the health of the coating personnel. This product also has the characteristics of thin coating, strong adhesion, good flexibility, and good insulation and anti-corrosion functions.
  • Non expansive fire retardant coatings for indoor steel structures

    Non expansive fire retardant coatings for indoor steel structures

    Convenient construction: spraying, roller coating and brushing can be used. Strong adhesion: it has strong adhesion to epoxy type, alkyd type and phenolic type antirust primer, which is solid and durable, widely used, with high quality and low price. Cdgc-a indoor ultra-thin steel structure fire retardant coating is suitable for fire protection of load-bearing members of various steel structure projects with fire resistance limit greater than 2 h. Such as aerospace, petroleum, chemical industry, electric power, metallurgy, national defense, light and textile industry and other outdoor buildings bear the fire protection of heavy steel structural parts, and are especially suitable for some steel structure projects with fire risk of hydrocarbon chemicals (such as oil, solvent, etc.), such as petrochemical engineering, garage, oil drilling platform, oil storage facility support frame, etc.
  • Outdoor intumescent fireproof coating for steel structure

    Outdoor intumescent fireproof coating for steel structure

    Intumescent fireproof coating for steel structure is a new high-grade environmental protection product developed by our company according to the national standard of gb14907-2018. When the product is heated, the foaming component in the film will decompose when heated to form a dense and uniform thermal insulation and oxygen insulation expansion carbon layer. So as to protect the steel structure.
  • Fire barrier

    Fire barrier

    Dc-a1-cd04 inorganic fire barrier is also called fire barrier or non combustible fire retardant plate. This board is made of a variety of non combustible materials by scientific deployment and pressing. It has good flame retardant performance, non combustion time of more than 3 hours in case of fire, high mechanical strength, non explosion, water and oil resistance, strong chemical corrosion resistance, non-toxic and other characteristics. In the combustion test of dc-a1-cd04 inorganic fire barrier, the best flame temperature is 1000 ℃ without deformation, all indexes meet the requirements of gb23864-2009, and the combustion performance reaches the a (incombustibility) standard specified in GB / t2408-2008. Dc-a1-cd04 inorganic fire barrier is mainly applicable to the fire protection and fire separation of cables of various voltage levels when laying on the bracket or bridge It is used in the cable engineering of power plants, chemical enterprises, iron and steel smelting enterprises, mines and other cable intensive places in China.
  • Nanocloth

    Nanocloth

    Ceramic fiber cloth is made of ceramic fiber and a certain proportion of organic fiber, lined with glass fiber (steel wire), spun into yarn, and then woven into cloth.
12 Next > >> Page 1 / 2